Guide to connect and sync data on Hanet Smartlist.
Phan Nguyen Audio guides you to connect and sync data between Tablet Hanet Smartlist with karaoke Hanet Playx Series or Hanet BaetX Pro.
- After launching Tablet Hanet Smartlist for the first time will have the following notice.
Method 1: Connect Tablet Hanet with PlayX via WIFI:
- Select the “Connect” icon on the PlayX device.
- Select WIFI.
- Select WIFI want to connect.
- Input WIFI password.
- After successful connection will notice as picture:
Connect Hanet Smartlist with WIFI
- Select the WIFI icon on the top right corner of the tablet screen.
- Select the wifi connection that coincides with the wifi that the Hanet PlayX box is connected to.
- After the connection is complete, return to the main screen, you will see the WIFI icon lost red X.
- Select the device icon next to WIFI.
- The “Existing Connections” screen shows which PlayX devices can be used.
- Select PlayX to connect to the PlayX device. Device name may change in the Settings> Device Name section.
- Press the ← icon to return to the main screen.
- Click the top three dots icon. Select “sync data”
- Then the data synchronization process starts.
- Successful data synchronization and music selection.
Method 2: Connect by ETHERNET.
- Select the “Connect” icon on the PlayX device.
- Select “Ethernet”.
- Select “Connect”
- Connection process
- Press the ← icon to return to the main screen.
- Click the top three dots icon. Select “sync data”
- Then the data synchronization process starts.
- Successful data synchronization and music selection.
CONNECT HANET SMARTLIST THROUGH HOTSPOT BY PLAYX
- Select icon “Setting”.
- Select icon “Hotspot”, select “ON”.
- Return to the main screen.
- Next Select the WIFI icon on the top right corner of the Hanet Smartlist screen.
- Select the wifi connection that coincides with the wifi that the Hanet PlayX box is connected to.
- After the connection is complete, return to the main screen, you will see the WIFI icon lost red X.
- Select the device icon next to WIFI.
- The “Existing Connections” screen shows which PlayX devices can be used.
- Select PlayX to connect to the PlayX device. Device name may change in the Settings> Device Name section.
- Press the ← icon to return to the main screen.
Click the top three dots icon. Select “sync data”
- Then the data synchronization process starts.
- Successful data synchronization and music selection.
If you need product advice or technical support, please contact: 1900.0075. Thank you!