Featured Nexo LS600 subwoofer for your room
Speaker line is imported from France are institutions dedicated to rooms with large areas, such as conference rooms, event … or used as kraoke speakers included senior and professional karaoke covers great room area
Setting luxurious, striking and powerful. Nexo LS600 subwoofer will make your space becomes more vivid
Nexo LS600 subwoofer built intelligent interoperable with the speakers of Nexo PS8-R2 and PS10-R2 Nexo speakers for sound quality and more professional
Specification of Nexo LS600 subwoofer
- Components : VLF LF 1 x 15″ (38cm) long excursion Neodymium 8 driver.
- Height x Width x Depth: 435mm x 688mm x 528 mm (17.12″ x 27.09″ x 20.79″).
- Weight: 30 kg (66 Lbs) net.
- Connectors: 2 x NL4MP SPEAKON 4 pole
- Construction: Baltic Birch Ply & textured, polyurethane black coating
- Fittings: Handles
- Flying Points
- Stand fittings
- 2 Metal recessed pockets.
- One plate connecting with external accessories.
- Internal Steel Stand Fitting on Top (35mm, 1 3/8″) allows pole mounting for 1 PS10-R2.
SYSTEM SPECIFICATIONS
- LS500 with PS10 TD Controller
- Frequency Response” 40 Hz – 110 Hz ±3dB.
- Usable Range: 38 Hz – 120 Hz.
- Sensitivity 1W @ 1m [b]: 101 dB SPL Nominal
- Nominal Peak SPL @ 1m [b]: 135 to 138 dB Peak
- Crossover Frequencies: 120 Hz Active through PS10 TD Controller-R2.
- Nominal Impedance: 8Ω
- Recommended Amplifiers: 1000 to 2000 Watts / 8Ω
SYSTEM OPERATION
- Electronic Controller: The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS). Use without a properly connected Controller will result in poor sound quality and may damage the components.
- SubBass: LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers. Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS.
- One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect.
- Speaker Cables: The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice.