These factors should be considered in designing a karaoke room

These factors should be considered in designing a karaoke room
To get a nice room and the back-end karaoke, external factors karaoke room interior design, you have to pay attention to sound quality elements in the room. During the design process the karaoke room, you combine sound absorption materials, and to minimize the negative spread resonance and distortion caused by room sound waves back to the room. The surface of walls should be decorated with sound absorption materials, anti-reflective tone. Arranging sources and the sitting position so that the most reasonable.

In the karaoke room, the sound is determinant of room quality. But you have to pay attention to the possibility of vibration as sound sources in the room. You should arrange the speakers away from the first source for karaoke, karaoke mixer, amplifier karaoke is very sensitive to vibration. If you get too close, the speaker emits sound waves cause vibrations directly to the source affects the quality of the equipment.

The best sitting position is where the signal intensity sound from speaker to your seating position of maximum. You will receive the best sound quality. You should not sit too close to the wall, because then you’ll get the whole life reflected sound, loss of audio fidelity. The best location is a wall about 1 meter and the distance between the two speakers and the listening position should be the same.

After the construction process designed karaoke room, you arrange the speakers in the room but the sound can cause resonance coincides with the resonance of the room, causing noise condition. To avoid this situation, you should position the speakers have investigated about 15 degrees towards the vocalist position. This way, the audience will feel the whole sound and will reduce the maximum resonance room. However, if the bass is much room due to recoil, you can lift up the speaker angle of 20 degrees will reduce the discrepancy. Do not place the speakers in parallel with the wall as it will cause resonance room.

Use the speaker to a fixed mounting speakers and will control the direction.

For bass reflex loudspeaker designed steam holes behind, if after the implementation of the principles on which the bass is still residual, then you can use a cloth or mousse foam insert into the hole slightly. Doing so will reduce the range of 30 to 50 Hz resonant enclosures

The above factors make your karaoke rooms have been the best sound quality. If you have any questions, please contac Phan Nguyễn Audio.